|
| Brand Name: | Cholly |
| Model Number: | CBJ-2200 |
| MOQ: | 1 |
| Price: | Negotiable |
Large FIBCs, jumbo bags, and special bulk bag structures may use wider body panels, folded sections, or developed base fabric. The CBJ-2200 FIBC Cutting Machine handles base fabric up to 2200 mm wide and combines pneumatic roll loading, automatic web guiding, length cutting, and opening preparation.
The 2200 mm value represents the maximum base-fabric width, not the finished jumbo bag width. Actual panel dimensions must be calculated from the developed bag drawing, seam allowance, folding method, and subsequent sewing structure.
A wide roll that continuously moves toward one side during unwinding and feeding may affect panel edges, opening positions, and downstream material receiving. The machine is equipped with automatic web guiding, with a specified correction distance of 300 mm.
The guiding mechanism adjusts lateral material position but does not replace correct roll installation and tension management. Roll center and feeding path should be checked whenever the fabric width, weight, or roll diameter changes.
The machine uses pneumatic loading for fabric rolls with a maximum diameter of 1100 mm. After feeding and guiding, the base fabric enters the cutting section for cold or hot cross-cutting at the specified length.
The CBJ-2200 also provides a fabric-opening function and offers automatic fabric patting and receiving as an option. The required receiving method should be confirmed according to whether the cut panels will be manually sorted, stacked, or transferred to the sewing station.
The layout of a large panel requires confirmation of fabric width, cutting length, opening dimensions, and folding direction. The machine provides a cutting-length range of 300–6000 mm and circular-hole or corner cutting within 200–600 mm.
Optional forward-folding, forward-and-reverse-folding, and cold/hot cutting modules support different bag structures. If several openings are required on one wide panel, the buyer should provide the number, size, and relative positions rather than only one opening diameter.
| Check Item | Information Required |
|---|---|
| Fabric width | Actual roll width, not exceeding 2200 mm |
| Roll diameter | Maximum 1100 mm |
| Developed panel dimensions | Width, length, and seam allowance |
| Cutting length | 300–6000 mm |
| Fabric structure | Weight and coated or uncoated condition |
| Opening requirement | Circular-hole or corner cutting within 200–600 mm |
| Opening position | Distance from the panel edge or center |
| Folding method | Forward or forward-and-reverse folding |
| Edge treatment | Cold or hot cutting |
| Fabric receiving | Whether automatic patting and receiving is required |
| Parameter | Specification |
|---|---|
| Model | CBJ-2200 |
| Machine type | Wide-width automatic FIBC cutting machine |
| Maximum fabric width | 2200 mm |
| Cutting length | 300–6000 mm |
| Cutting accuracy | ±2 mm |
| Production capacity | 15–18 pieces/min at L=1000 mm |
| Maximum roll diameter | 1100 mm |
| Roll-loading method | Pneumatic loading |
| Web-guiding method | Automatic web guiding |
| Correction distance | 300 mm |
| Hole and corner cutting range | 200–600 mm |
| Cutting method | Cold or hot cross-cutting |
| Temperature control | 280°C |
| Optional functions | Forward folding, forward-and-reverse folding, automatic fabric patting and receiving |
| Safety configuration | Safety light curtain at the cutting position |
| Total power | 8 kW |
| Power supply | 380/220 V, 50 Hz |
| Air pressure | 0.6–0.8 MPa |
| Machine dimensions | 8000 × 2560 × 1500 mm |
This FIBC Cutting Machine is mainly used for cutting wide PP woven body panels for large FIBCs, jumbo bags, and bulk bags. It combines roll loading, automatic web guiding, 300–6000 mm length cutting, and 200–600 mm circular-hole or corner preparation. The 2200 mm fabric capacity supports bag structures requiring wider developed panels. Whether it reduces the number of joined seams depends on the buyer’s bag drawing.
The PDF specifies 15–18 pieces/min at L=1000 mm. Wide fabric does not automatically increase or reduce output, but panel length, material weight, opening quantity, folding, and receiving requirements will affect the actual cycle. Trial cutting with the target material is recommended before production planning.
No. It is the maximum base-fabric width. Finished bag width also depends on the bag structure, folds, seam allowances, and sewing method.
The PDF does not provide separate cutting data for coated and uncoated materials. The buyer’s actual material should be tested to evaluate cold- or hot-cut edge condition, sticking, and dimensions.
No. The PDF lists automatic fabric patting and receiving as an optional module, so it should be confirmed separately when ordering.
